|Snap||CLI ~ UI||CLI ~ UI||CLI ~ UI||CLI ~ UI|
|Packages||CLI ~ UI||CLI ~ UI||CLI ~ UI||CLI ~ UI|
MAAS enlists and commissions machines through the use of its DHCP server running on an untagged VLAN. Although this MAAS-managed DHCP can also be part of the deploy phase, an external DHCP server can optionally be used instead for this purpose. If MAAS detects an external DHCP server, it will display it on the rack controller’s page, accessible by selecting ‘Controllers’ from the top menu in the web UI.
In addition, the machine subnet is usually on the untagged VLAN. If not, you will need to route DHCP packets between the subnet and the MAAS-provided DHCP subnet. It is also possible to forward DHCP traffic from one VLAN to another using an external DHCP relay service.
This documentation presupposes that MAAS-managed DHCP is used to enlist and commission machines. Using an external DHCP server for enlistment and commissioning may work, but note that this is not supported. MAAS cannot manage an external DHCP server, nor can it keep leases synchronised when you return a machine to the pool.
This article delves into these issues, offering guidance on setting up and managing your DHCP configuration.
Twelve questions you may have:
- What are reserved IP ranges?
- What is post-commission configuration
- How and why should I enable MAAS-managed DHCP?
- How do I resolve IP conflicts?
- How can I extend a reserved dynamic IP range?
- How and why should I configure external DHCP?
- How and why should I use a DHCP relay?
- How and why should I customise MAAS with DHCP snippets?
- How do I create an A or AAAA record in DNS?
- How do I create an alias (CNAME) record in DNS?
- How do I create a Mail Exchange pointer record in DNS?
- How do I set a DNS forwarder?
MAAS-managed DHCP needs a reserved dynamic IP range enlist and commission machines. You should create such a range when you are enabling DHCP with the web UI.
To enable DHCP on a VLAN on a certain fabric:
maas $PROFILE vlan update $FABRIC_ID $VLAN_TAG dhcp_on=True \ primary_rack=$PRIMARY_RACK_CONTROLLER
To enable DHCP HA, you will need both a primary and a secondary controller:
maas $PROFILE vlan update $FABRIC_ID $VLAN_TAG dhcp_on=True \ primary_rack=$PRIMARY_RACK_CONTROLLER \ secondary_rack=$SECONDARY_RACK_CONTROLLER
You must enable DHCP for PXE booting on the ‘untagged’ VLAN.
You will also need to set a default gateway:
maas $PROFILE subnet update $SUBNET_CIDR gateway_ip=$MY_GATEWAY
In some cases, MAAS manages a subnet that is not empty, which could result in MAAS assigning a duplicate IP address. MAAS is capable of detecting IPs in use on a subnet. Be aware that there are two caveats:
- If a previously-assigned NIC is in a quiescent state or turned off, MAAS may not detect it before duplicating an IP address.
2/ At least one rack controller must have access to the IP-assigned machine in order for this feature to work.
MAAS also recognises when the subnet ARP cache is full, so that it can re-check the oldest IPs added to the cache to search for free IP addresses.
If necessary, it is possible to add further portions of the subnet to the dynamic IP range (see IP ranges). Furthermore, since you enabled DHCP on a VLAN basis and a VLAN can contain multiple subnets, it is possible to add a portion from those subnets as well. Just select the subnet under the ‘Subnets’ page and reserve a dynamic range. DHCP will be enabled automatically.
If an external DHCP server is used to deploy machines, then a reserved IP range should be created to prevent the address namespace from being corrupted. For instance, address conflicts may occur if you set a machine’s IP assignment mode to ‘Auto assign’ in the context of an external DHCP server. See IP ranges to create such a range. It should correspond to the lease range of the external server.
You should not enable DHCP relays in MAAS without sufficient planning. In particular, MAAS does not provide the actual relay. It must be set up as an external service by the administrator. What MAAS does provide is the DHCP configuration that MAAS-managed DHCP requires in order to satisfy any client requests relayed from another VLAN.
To relay from one VLAN (source) to another VLAN (target):
Ensure the target VLAN has DHCP enabled.
Set up the external relay. This relay is set up independently from MAAS. See DHCP relay for software suggestions.
- To relay DHCP traffic for a VLAN (source) through another VLAN (target):
maas $PROFILE vlan update $FABRIC_ID $VLAN_VID_SRC relay_vlan=$VLAN_ID_TARGET
For example, to relay VLAN with vid 0 (on fabric-2) through VLAN with id 5002 :
maas $PROFILE vlan update 2 0 relay_van=5002
When MAAS manages DHCP, you customise it through the use of DHCP snippets. These are user-defined configuration options that can be applied either globally, per subnet, or per machine. You apply a global snippet to all VLANs, subnets, and machines. All three types end up in
/var/lib/maas/dhcpd6.conf. For information on what options to use, refer to the
dhcpd.conf man page.
Modifications made directly to
dhcpd6.conf.template are not supported.
When you create a snippet, MAAS enables it by default.
To create a global snippet:
maas $PROFILE dhcpsnippets create name=$DHCP_SNIPPET_NAME \ value=$DHCP_CONFIG description=$DHCP_SNIPPET_DESCRIPTION \ global_snippet=true
To create a subnet snippet:
maas $PROFILE dhcpsnippets create name=$DHCP_SNIPPET_NAME \ value=$DHCP_CONFIG description=$DHCP_SNIPPET_DESCRIPTION \ subnet=$SUBNET_ID
You can also specify subnets in CIDR format.
To create a node snippet:
maas $PROFILE dhcpsnippets create name=$DHCP_SNIPPET_NAME \ value=$DHCP_CONFIG description=$DHCP_SNIPPET_DESCRIPTION \ node=$NODE_ID
You can also use a hostname instead of the node ID.
To list all snippets (and their characteristics) in the MAAS:
maas $PROFILE dhcpsnippets read
To list a specific snippet:
maas $PROFILE dhcpsnippet read id=$DHCP_SNIPPET_ID
The snippet name can also be used instead of its ID:
maas $PROFILE dhcpsnippet read name=$DHCP_SNIPPET_NAME
Update a snippet attribute:
maas $PROFILE dhcpsnippet update $DHCP_SNIPPET_ID <option=value>
You can also use a snippet name instead of its ID.
Enabling and disabling a snippet is considered a snippet update and is done via a boolean option (‘true’ or ‘false’). You can disable a snippet like this:
maas $PROFILE dhcpsnippet update $DHCP_SNIPPET_ID enabled=false
When you disable a snippet, MAAS removes the text you added to the dhcpd.conf file when you created the snippet.
To delete a snippet:
maas $PROFILE dhcpsnippet delete $DHCP_SNIPPET_ID
You can also use a snippet name in place of its ID.
It is possible to set DNS parameters using the MAAS CLI, using the following instructions.
An administrator can create an A record when creating a DNS resource with an IPv4 address.
mass $PROFILE dnsresources create fqdn=$HOSTNAME.$DOMAIN ip_addresses=$IPV4ADDRESS
An administrator can create an AAAA record when creating a DNS resource with an IPv6 address.
mass $PROFILE dnsresources create fqdn=$HOSTNAME.$DOMAIN ip_addresses=$IPV6ADDRESS
An administrator can set a DNS Alias (CNAME record) to an already existing DNS entry of a machine.
mass $PROFILE dnsresource-records create fqdn=$HOSTNAME.$DOMAIN rrtype=cname rrdata=$ALIAS
For example, to set
webserver.maas.io to alias to
maas $PROFILE dnsresource-records create fqdn=webserver.maas.io rrtype=cname rrdata=www
An administrator can set a DNS Mail Exchange pointer record (MX and value) to a domain.
maas $PROFILE dnsresource-records create fqdn=$DOMAIN rrtype=mx rrdata='10 $MAIL_SERVER.$DOMAIN'
For example, to set the domain.name managed by MAAS to have an MX record and that you own the domain:
maas $PROFILE dnsresource-records create fqdn=maas.io rrtype=mx rrdata='10 smtp.maas.io'
To set a DNS forwarder:
maas $PROFILE maas set-config name=upstream_dns value=$MY_UPSTREAM_DNS