Test logs (deb/3.1/CLI)

For any machine which has undergone testing, the Tests log screen – under the “Tests” tab – shows a list of tests that have been run for that machine, along with a timestamp and result. You can view the detailed logs for each test script from this tab.

By default, every MAAS machine is tested with the smartctl-validate script, which is a script prepared by Canonical using the smartmontools kit. This is a disk integrity test. Typical output includes the following:

INFO: Verifying SMART support for the following drive: /dev/sda
INFO: Running command: sudo -n smartctl --all /dev/sda
INFO: SMART support is available; continuing...
INFO: Verifying SMART data on /dev/sda
INFO: Running command: sudo -n smartctl --xall /dev/sda
SUCCESS: SMART validation has PASSED for: /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-115-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Device Model:     QEMU HARDDISK
Serial Number:    QM00001
Firmware Version: 2.5+
User Capacity:    5,368,709,120 bytes [5.36 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
Local Time is:    Wed Sep  2 22:29:12 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Unavailable
Write cache is:   Enabled
ATA Security is:  Unavailable
Wt Cache Reorder: Unavailable

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  288) seconds.
Offline data collection
capabilities: 			 (0x19) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
  1 Raw_Read_Error_Rate     PO----   100   100   006    -    0
  3 Spin_Up_Time            PO----   100   100   000    -    16
  4 Start_Stop_Count        -O----   100   100   020    -    100
  5 Reallocated_Sector_Ct   PO----   100   100   036    -    0
  9 Power_On_Hours          PO----   100   100   000    -    1
 12 Power_Cycle_Count       PO----   100   100   000    -    0
190 Airflow_Temperature_Cel PO----   069   069   050    -    31 (Min/Max 31/31)
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

Read SMART Log Directory failed: scsi error badly formed scsi parameters

General Purpose Log Directory not supported

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11) not supported

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.