Block Devices

Once the initial storage layout has been configured on a machine, you can perform many operations to view and adjust the entire storage layout for the machine. In MAAS there are two different types of block devices.

Physical

A physical block device is a physically attached block device such as a 100GB hard drive connected to a server.

Virtual

A virtual block device is a block device that is exposed by the Linux kernel when an operation is performed. Almost all the operations on a physical block device can be performed on a virtual block device, such as a RAID device exposed as md0.

List Block Devices

To view all block devices on a machine use the read operation. This list both physical and virtual block devices, as you can see in the output from the following command:

maas admin block-devices read <node-id>

Output:

Success.
Machine-readable output follows:
[
    {
        "id": 10,
        "path": "/dev/disk/by-dname/vda",
        "serial": "",
        "block_size": 4096,
        "available_size": 0,
        "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/10/",
        "filesystem": null,
        "id_path": "/dev/vda",
        "size": 5368709120,
        "partition_table_type": "MBR",
        "model": "",
        "type": "physical",
        "uuid": null,
        "used_size": 5365563392,
        "used_for": "MBR partitioned with 1 partition",
        "partitions": [
            {
                "bootable": false,
                "id": 9,
                "resource_uri":"/MAAS/api/2.0/nodes/4y3h8a/blockdevices/10/partition/9",
                "path": "/dev/disk/by-dname/vda-part1",
                "uuid": "aae082cd-8be0-4a64-ab49-e998abd6ea43",
                "used_for": "LVM volume for vgroot",
                "size": 5360320512,
                "type": "partition",
                "filesystem": {
                    "uuid": "a56ebfa6-8ef4-48b5-b6bc-9f9d27065d24",
                    "mount_options": null,
                    "label": null,
                    "fstype": "lvm-pv",
                    "mount_point": null
                }
            }
        ],
        "tags": [
            "rotary"
        ],
        "name": "vda"
    },
    {
        "id": 11,
        "path": "/dev/disk/by-dname/lvroot",
        "serial": null,
        "block_size": 4096,
        "available_size": 0,
        "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/11/",
        "filesystem": {
            "uuid": "7181a0c0-9e16-4276-8a55-c77364d137ca",
            "mount_options": null,
            "label": "root",
            "fstype": "ext4",
            "mount_point": "/"
        },
        "id_path": null,
        "size": 3221225472,
        "partition_table_type": null,
        "model": null,
        "type": "virtual",
        "uuid": "fc8ba89e-9149-412c-bcea-e596eb7c0d14",
        "used_size": 3221225472,
        "used_for": "ext4 formatted filesystem mounted at /",
        "partitions": [],
        "tags": [],
        "name": "vgroot-lvroot"
    }
]

Read Block Device

If you want to read just one block device instead of listing all block devices the read operation on the block device endpoint provides that information. To display the details on device ‘11’ from the previous output, for example, we could enter:

maas admin block-device read <node-id> 11

The above command generates the following output:

Success.
Machine-readable output follows:
{
    "available_size": 0,
    "path": "/dev/disk/by-dname/vgroot-lvroot",
    "name": "vgroot-lvroot",
    "used_for": "ext4 formatted filesystem mounted at /",
    "type": "virtual",
    "used_size": 3221225472,
    "filesystem": {
        "uuid": "7181a0c0-9e16-4276-8a55-c77364d137ca",
        "mount_point": "/",
        "mount_options": null,
        "fstype": "ext4",
        "label": "root"
    },
    "id_path": null,
    "id": 11,
    "partition_table_type": null,
    "block_size": 4096,
    "tags": [],
    "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/11/",
    "uuid": "fc8ba89e-9149-412c-bcea-e596eb7c0d14",
    "serial": null,
    "partitions": [],
    "size": 3221225472,
    "model": null
}

It is also possible to use the name of the block device, such as ‘sda’ or ‘vda’, instead of its ‘id’:

s admin block-device read <node-id> vda

MAAS allows the name of a block device to be changed. If the block device name has changed then the API call needs to use the new name.

Using the ID is safer as it never changes.

Create Block Device

MAAS gathers the required information itself on block devices when re- commissioning a machine. If this doesn’t provide the required information, it is also possible - though not recommended - for an administrator to use the API to manually add a physical block device to a machine.

maas admin block-devices create <node-id> name=vdb model="QEMU" serial="QM00001" size=21474836480 block_size=4096

Depending on your configuration, output should be similar to the following:

Success.
Machine-readable output follows:
{
    "available_size": 21474836480,
    "path": "/dev/disk/by-dname/vdb",
    "name": "vdb",
    "used_for": "Unused",
    "type": "physical",
    "used_size": 0,
    "filesystem": null,
    "id_path": "",
    "id": 12,
    "partition_table_type": null,
    "block_size": 4096,
    "tags": [],
    "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/12/",
    "uuid": null,
    "serial": "QM00001",
    "partitions": [],
    "size": 21474836480,
    "model": "QEMU"
}

The serial number is what MAAS will use when a machine is deployed to find the specific block device. It’s important that this be correct. In a rare chance that your block device does not provide a model or serial number you can provide an id_path. The id_path should be a path that is always the same, no matter the kernel version.

Update Block Device

An administrator can also update the details held on a physical block device, such as its name, from the API:

maas admin block-device update <node-id> 12 name=newroot

Output from this command will show that the ‘name’ has changed:

Success.
Machine-readable output follows:
{
    "block_size": 4096,
    "size": 21474836480,
    "filesystem": null,
    "model": "QEMU",
    "name": "newroot",
    "partitions": [],
    "tags": [],
    "used_size": 0,
    "path": "/dev/disk/by-dname/newroot",
    "id_path": "",
    "uuid": null,
    "available_size": 21474836480,
    "id": 12,
    "used_for": "Unused",
    "type": "physical",
    "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/12/",
    "partition_table_type": null,
    "serial": "QM00001"
}

Delete Block Device

Physical and virtual block devices can be deleted by an administrator, while ordinary users can only delete virtual block devices:

maas admin block-device delete <node-id> 12

Format Block Device

An entire block device can be formatted by defining a filesystem with the ‘format’ API call:

maas admin block-device format <node-id> 11 fstype=ext4

Successful output from this command will look similar to this:

Success.
Machine-readable output follows:
{
    "block_size": 4096,
    "size": 3221225472,
    "filesystem": {
        "label": "",
        "fstype": "ext4",
        "mount_options": null,
        "uuid": "75e42f49-9a45-466c-8425-87a40e4f4148",
        "mount_point": null
    },
    "model": null,
    "name": "vgroot-lvroot",
    "partitions": [],
    "tags": [],
    "used_size": 3221225472,
    "path": "/dev/disk/by-dname/vgroot-lvroot",
    "id_path": null,
    "uuid": "fc8ba89e-9149-412c-bcea-e596eb7c0d14",
    "available_size": 0,
    "id": 11,
    "used_for": "Unmounted ext4 formatted filesystem",
    "type": "virtual",
    "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/11/",
    "partition_table_type": null,
    "serial": null
}

You cannot format a block device that contains partitions or is used to make another virtual block device.

Unformat Block Device

You can remove the filesystem from a block device with the ‘unformat’ API call:

maas admin block-device unformat <node-id> 11

The output from this command should show the filesystem is now ‘null’:

Success.
Machine-readable output follows:
{
    "available_size": 3221225472,
    "path": "/dev/disk/by-dname/vgroot-lvroot",
    "name": "vgroot-lvroot",
    "used_for": "Unused",
    "type": "virtual",
    "used_size": 0,
    "filesystem": null,
    "id_path": null,
    "id": 11,
    "partition_table_type": null,
    "block_size": 4096,
    "tags": [],
    "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/11/",
    "uuid": "fc8ba89e-9149-412c-bcea-e596eb7c0d14",
    "serial": null,
    "partitions": [],
    "size": 3221225472,
    "model": null
}

Mount Block Device

If a block device has a filesystem, you can use the ‘maas’ command to mount a block devices at a given mount point:

maas admin block-device mount <node-id> 11 mount_point=/srv

The mount point is included in the successful output from the command:

Success.
Machine-readable output follows:
{
    "available_size": 0,
    "path": "/dev/disk/by-dname/vgroot-lvroot",
    "name": "vgroot-lvroot",
    "used_for": "ext4 formatted filesystem mounted at /srv",
    "type": "virtual",
    "used_size": 3221225472,
    "filesystem": {
        "uuid": "6f5965ad-49f7-42da-95ff-8000b739c39f",
        "mount_point": "/srv",
        "mount_options": "",
        "fstype": "ext4",
        "label": ""
    },
    "id_path": null,
    "id": 11,
    "partition_table_type": null,
    "block_size": 4096,
    "tags": [],
    "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/11/",
    "uuid": "fc8ba89e-9149-412c-bcea-e596eb7c0d14",
    "serial": null,
    "partitions": [],
    "size": 3221225472,
    "model": null
}

Unmount Block Device

To remove the mount point from the block device, use the ‘unmount’ call:

maas admin block-device unmount <node-id> 11 mount_point=/srv

The previous command will include a nullified ‘mount_point’ in its output:

Success.
Machine-readable output follows:
{
    "available_size": 0,
    "path": "/dev/disk/by-dname/vgroot-lvroot",
    "name": "vgroot-lvroot",
    "used_for": "Unmounted ext4 formatted filesystem",
    "type": "virtual",
    "used_size": 3221225472,
    "filesystem": {
        "uuid": "6f5965ad-49f7-42da-95ff-8000b739c39f",
        "mount_point": null,
        "mount_options": null,
        "fstype": "ext4",
        "label": ""
    },
    "id_path": null,
    "id": 11,
    "partition_table_type": null,
    "block_size": 4096,
    "tags": [],
    "resource_uri": "/MAAS/api/2.0/nodes/4y3h8a/blockdevices/11/",
    "uuid": "fc8ba89e-9149-412c-bcea-e596eb7c0d14",
    "serial": null,
    "partitions": [],
    "size": 3221225472,
    "model": null
}

Set as Boot Disk

By default, MAAS picks the first added block device to the machine as the boot disk. In most cases this works as expected as the BIOS usually enumerates the boot disk as the first block device. There are cases where this fails and the boot disk needs to be set to another disk. This API allow setting which block device on a machine MAAS should use as the boot disk.:

maas admin block-device set-boot-disk <node-id> 10

Only an administrator can set which block device should be used as the boot disk and only a physical block device can be set as as the boot disk. This operation should be done before a machine is acquired or the storage layout will be applied to the previous boot disk.